DOWSIL Q1-4010 Conformal Coating

You are here: Products> Chemical - Technical Products> Electro chemicals> Conformal coatings> DOWSIL Q1-4010 Conformal Coating

Select productConformal Coating - which application suites best?DOWSIL 1-2577 Conformal CoatingDOWSIL 1-2577 Low VocDOWSIL 1-2620 DispersionDOWSIL 1-2620 Low VOC Conformal CoatingDOWSIL 1-4105 Conformal CoatingDOWSIL 3-1944 RTV CoatingDOWSIL 3-1953 Conformal CoatingDOWSIL 3-1965 Conformal CoatingDOWSIL 3140 RTV CoatingDOWSIL CC-3122 Conformal CoatingDOWSIL CC-4555 Long Bath Life Conformal CoatingDOWSIL CC-8030 UV and Moisture Dual Cure Conformal CoatingDOWSIL HC 1000 Gray Conformal CoatingDOWSIL HC 1100DOWSIL HC 2000 Conformal CoatingDOWSIL HC 2100 Conformal CoatingDOWSIL Q1-4010 Conformal CoatingDOWSIL SE 9157 Conformal CoatingDOWSIL SE 9186 L SealantDOWSIL SE 9187 L Adhesive Black, Clear (Translucent), or WhiteDOWSIL SE 9189 L RTVELECTROLUBE 2K300 Two-Part CoatingELECTROLUBE 2K350 Two-Part CoatingELECTROLUBE 2K500 Two-Part CoatingELECTROLUBE 2K550 Two-Part CoatingELECTROLUBE 2K850 UV Cure Two-Part CoatingELECTROLUBE 2KPB Conformal Coating Reaction AgentELECTROLUBE AFA - Aromatic-Free Acrylic CoatingELECTROLUBE APL – Acrylic Protective LacquerELECTROLUBE CPL – Clear Protective LacquerELECTROLUBE DCA - SCC3 Conformal CoatingELECTROLUBE DCA-FD - Fast-Dry DCAELECTROLUBE DCB - Modified Silicone CoatingELECTROLUBE DCR – SCC3 Conformal CoatingELECTROLUBE DCRT – High Build DCRELECTROLUBE DCT – Non Acrylic Coating ThinnersELECTROLUBE FPC Fluorinated Polymer CoatingELECTROLUBE HFS High Performance Fluorinated SolventELECTROLUBE HPA – High Performance AcrylicELECTROLUBE LFCC – Lead Free Conformal CoatingELECTROLUBE PCM – Peelable Coating MaskELECTROLUBE PTH – Polyurethane Conformal Coating ThinnersELECTROLUBE PUC – Polyurethane CoatingELECTROLUBE TFA - Toluene Free AcrylicELECTROLUBE TFCF – Fluorocoat Surface ModifierELECTROLUBE UAT – Universal Acrylic ThinnersELECTROLUBE URC High Performance Urethane CoatingELECTROLUBE UVCL - UV Cure Conformal CoatingSYLGARD 1-4128 Conformal Coating Kit

EN AT DE CZ HU SI SK HR 

DOW

DOWSIL Q1-4010 CONFORMAL COATING

Send enquiry for this product!

DOWSIL™ Q1-4010 Conformal Coating is a one-part, transparent medium viscosity conformal coating.

Description 
Solventless heat cure conformal coatings are designed for rapid processing at low temps (below 125°C). They require some heating to cure, offering long bath at room temperature. Like the room- temperature-curing elastomers, these products offer optimum stress relief to surface mount and fine pitch components and interconnections in a variety of service environments. This product line also features coatings that are Mil Spec, IPC-CC-830 and UL recognized. Conformal coatings are materials applied in thin layers (typically a few mils or microns) onto printed circuits or other substrates. They provide proven, cost effective environmental and mechanical protection to significantly extend the life of the components and circuitry.  


Features & Benfits

• Medium viscosity 
• Heat cure 
• Cures to soft, low stress elastomer 
• No added solvents 
• UV indicator for inspection 
• UL V-1 flammability rating 
• IPC-CC-830B, Mil Spec 46058C tested 
• Rapid, versatile cure processing controlled by temperature 
• Good adhesion allows use with many low-solids (no clean) and no-lead solders 
• UV indicator allows for automated inspection

Application Methods

• Dip 
• Spray 
• Brush 
• Flow 
• Automated pattern coating

Pdf:

• TDS DOWSIL Q1 4010 Conformal Coating.pdf