PERMABOND 1K ES566

You are here: Products> Chemical - Technical Products> Adhesives> Epoxy adhesives> PERMABOND 1K ES566

Select productAbout 2-part EpoxiesAbout Single Part EpoxiesPERMABOND 1K ES550PERMABOND 1K ES5505 High Temperature EpoxyPERMABOND 1K ES558PERMABOND 1K ES560PERMABOND 1K ES561PERMABOND 1K ES562PERMABOND 1K ES566PERMABOND 1K ES568PERMABOND 1K ES5681PERMABOND 1K ES569PERMABOND 1K ES5691PERMABOND 1K ES5722PERMABOND 1K ES5741PERMABOND 1K ES5748PERMABOND 1K ES578PERMABOND 1K ES579PERMABOND 2K ET500PERMABOND 2K ET505PERMABOND 2K ET510PERMABOND 2K ET514PERMABOND 2K ET515PERMABOND 2K ET536PERMABOND 2K ET5364PERMABOND 2K ET538PERMABOND 2K ET540PERMABOND 2K ET5401PERMABOND 2K ET5411 High Temperature Resistant EpoxyPERMABOND 2K MT3809PERMABOND 2K MT382PERMABOND 2K MT3821

EN AT DE CZ HU SI SK HR 

Permabond

PERMABOND 1K ES566

Send enquiry for this product!

PERMABOND ES566 is a single-part epoxy adhesive which has excellent adhesion to metal surfaces, composites and difficult to bond plastics (such as Nylon, PBT etc.). The high bond strength of this adhesive allows it to replace mechanical fastening, soldering or brazing. It has a rapid cure - 15 minutes at 120°C and can be cured at temperatures as low as 80°C.

Features & Benefits

• Excellent adhesive strength 
• Rapid cure at low temperature 
• Easy to use – no mixing required 
• High shear and peel strength 
• High temperature resistance 
• Suitable for hard to bond plastics

Properties
Shear strength (Steel cured at >100°C): 18-22 N/mm²
Hardness: 80 Shore D
Viscosity 20rpm: 60,000-120,000 mPa.s
max. gap fill: 2 mm
Cure speed 120°C: 15 min
Appearance: Grey

Pdf:

• TDS PERMABOND 1K ES566 eng.pdf