PERMABOND 920 is the original allyl cyanoacrylate adhesive. It is
a single part, low viscosity liquid that will cure rapidly at room
temperature when pressed into a thin film between parts.
PERMABOND 920 will cure to fixture strength in 10 seconds on
most surfaces, and rapidly develops high strength with full cure
obtained in 24 hours. The adhesive was specifically designed to
meet the high temperature resistance required by certain
applications. It provides excellent bond strength to steel,
aluminum, and most metal surfaces. The cyanoacrylate will also
adhere well to a wide variety of other materials including most
types of plastic and rubber.
Features & Benefits- Rapid development of high strength
- Ease of use – no mixing or heat cure
- Bonds most materials
- 100% reactive, no solvents
PropertiesShear strength (Steel): 19-23 N/mm²
Impact Strength (ASTM D‐950): 6‐14 kJ/m²
Hardness: 85 Shore A
Viscosity: 70‐90 mPa.s
max. gap fill: 0.15 mm
Fixture / handling time: 15‐20 sec
Appearance: Colourless
