You are here: News> Product news> ELECTROLUBE ES807 SMD Adhesive | New
PLEXUS MA515 | New
Adhesive to bond high engineered materials with no abrasionProperties: Colour: grey (adhesive white, activator black)Mix ratio (by volume): 1:1Viscosity (cps): 140,000 - 200,000Working time (mins): 10 - 15 Fixture time (mins): 30 - 35Shear strength (MPa): 17.2 - 24.1Modulus (MPa): 344 - 483Gap fill (mm): 0.75 - 18 Recommended for: pDCPD (Telene & Metton), Carbon Fibre, PA Resins, ABS, Acrylics, FRP, Gelcoats, PVC, Stainless Steel, ...
UVAHAND LED | New
UVAHAND LED is a high-intensity hand-held UV lamp. It is easy to transport, ergonomically designed and ideal for mobile use.Its intensive irradiation ensures reliable production results within seconds. A homogeneous intensity distribution is guaranteed by the arrangements of the LEDs.The typical service life of a LED is longer than 20.000 hours. The UVAHAND LED can be switched on and off as often as necessary. It does not require a warm-up or cooling phase.It is available with emitted ...
InnoTrans 2014
Please visit us at the international trade fair for Rail traffic engineering InnoTrans from 23.9. – 26.9.2014 in Berlin Hall 8.2. stand 230 ULBRICH produces special Press and Test-Solutions for the Railway IndustryOur sales programme includes:-Spring testersShockabsorber test equipmentWheel set remover and assembly rigsWheel set bearing / housing assemble and test machinesAdjust and straightening and general assembly unitsThe machines and test systems are designed to suit the ...
500kN Universal in-line coil spring test- and setting machine
The test machine is designed to measure a variety of different spring sizes from a diamter of 80mm - 500mm and lengths from 150mm to 900mm. The measurement can be carried out immediately after the manufacturing process is completed, and if required can also be integrated into setting processes. The machine guides the springs automatically and the measurement of the spring is carried out following a pre-programmed cycle. The individual springs will then be sorted according to wheter the test ...
HÖNLE bluepoint LED eco | New
Bluepoint LED eco has been developed for all applications requiring a most intensive UV irradiation with very limited space. Thanks to its high intensity and the possibility to program complete process sequences, e.g. exposure series with different intensities and holding times, it is possible to realize shortest cycle and machine throughput times especially in fully automated production lines. Likewise, bluepoint LED eco can be used in the laboratory for manual ...
TECNITE FG H1 OCL 350 High Temperature Oil | New
Tecnite FG H1 OCL 350 is a high temperature NFS H1 registered oven chain oil produced from a combination of food grade polyol ester base stocks and additives. Developed to operate in temperatures up to 260°C the additive package maximizes the lubricant’s wear protection capabilities while minimizing evaporation losses. These features result in extended chain life and lower oil consumption cost benefits. Key applications for Tecnite High Temp H1 oils include high-temp ...
TECNITE MA52 | New
Tecnite MA 52 is a 2-part, Structural Acrylate-Hybrid Adhesive. It has been developed for bonding of low surface energy materials such as Polypropylene (PP), Polyethylene (PE). In most cases it can be used without special surface pretreatmet. Benefits: Impact-resistant, flexible, excellent adhesion to difficult to bond surfaces such as PP, PE, PTFE or EPDM Good water and general chemical resistance Specially developed for bonding, encapsulating and sealing of Polyolefin ...
HÖNLE UVATEC high-performance disinfection modules | New
Hönle UVATEC modules offer effective surface disinfection through UVC irradiation – a reliable and environmentally compatible alternative to chemical methods. UVATEC UV disinfection modules have CAD-optimised reflector geometriy to guarantee the highest irradiance possible hence ensuring very good inactivation rates even for highly resistant micro-organisms. The irradiation times required do not exceed 0.5 seconds. Thanks to their compact and slender design as well as to ...
TEROTECH-MAINTENANCE trade fair in Celje, Slovenia
ULBRICH will be exibiting on the trade fair TEROTECH-MAINTENANCE in Celje, Slovenia from 20th to 23rd of May 2014.We invite you to visit us at the stand 46 in hall D.The TEROTECH-MAINTENANCE fair is the most important biennial event in Slovenia featuring product suppliers and service providers to ensure efficient maintenance and use of building complexes, machines and resources in industry. It attracts over 21,000 target-oriented visitors in only four days.
ELECTROLUBE ES807 SMD Adhesive | New
Electrolube ES 807 is designed for the bonding of surface mounted devices to printed circuit boards prior to wave soldering. It is particularly suited for applications where medium to high dispense speeds, high dot profile, high wet strength and good electrical characteristics are required. Features:Suited for high speed dispenser (25,00-50,000DPH); good dot profile Excellent wet strength Excellent adhesion to substrate Good electrical characteristics ELECTROLUBE ...
