SPX POWER TEAM HS: 1 - 1 1/2T Spreader

You are here: Products> Hydraulic & other Tools> Bolting tools> SPX POWER TEAM HS: 1 - 1 1/2T Spreader

Select productSPX POWER TEAM ENS: Nut SplitterSPX POWER TEAM HFS: 5 - 10T Pipe Flange SpreaderSPX POWER TEAM HNS: 15 - 25T Nut SplitterSPX POWER TEAM HS: 1 - 1 1/2T SpreaderSPX POWER TEAM MRT: Bolt TensionerSPX POWER TEAM SRT: Top Side TensionerSPX POWER TEAM SST: SubSea TensionerSPX POWER TEAM TWHC High Cycle Torque WrenchSPX POWER TEAM TWLC: Low Clearance Torque WrenchSPX POWER TEAM TWSD: Square Drive Torque WrenchSPX POWER TEAM Wind Tensioners

EN AT DE CZ HU SI SK HR 

SPX POWER TEAM HS: 1 - 1 1/2T SPREADER

Send enquiry for this product!

• Use to lift machines or as a clamp; spread concrete forms or rebar or preform straightening jobs.
• Conforms to ASME B30.1 standard.
• High strength alloy steel forged upper and lower jaws on HS2000. Jaws are spring return; retract automatically when pressure is released.
• No. HS2000- 1ton capacity spreader. Full 2,000 lbs. capacity at 10,000 psi with 4" spread. Can be "dead-ended" at 4" spread under full load. Needs only 9/16" clearance to engage jaws.
• No. HS3000- 1 1/2 ton capacity spreader. Full 3,000 lb. capacity at 10,000 psi with 11 1/2 spread. Greater than competitive units. Needs only 1 1/4" clearance to engage jaws. Can be "dead-ended" at 11 1/2" spread at full load.  

Pdf:

• SPX POWER TEAM HS 1 1 1 2T Spreader.pdf