You are here: Products> Chemical - Technical Products> Electro chemicals> Adhesives for electronics
ADHESIVES FOR ELECTRONICS
Adhesives for electronics by Panacol
The Panacol product line of Elecolit® conductive adhesives are both electrically and thermally conductive adhesives. Elecolit® conductive adhesives contain metallic filling materials, primarily ...
ELECTOLUBE RCS
Electrolube RCS - Rapid Cure Sealant - is a single component, solvent-free, low odour RTV which cures upon exposure to atmospheric moisture. The product offers high bond strength when applied ...
ELECTROLUBE ES807 SMD Adhesive
Electrolube ES 807 is designed for the bonding of surface mounted devices to printed circuit boards prior to wave soldering. It is particularly suited for applications where medium to high ...
ELECTROLUBE ES808 SMD Adhesive
Electrolube ES 808 is designed for the bonding of surface mounted devices to printed circuit boards prior to wave soldering. It is particularly suited for pin transfer and stencil print ...
PANACOL Elecolit 3012
Electrically Conductive Adhesive | Dispenser, Screen Printing, Good Conductivity, Good Gap Filling Capacity
PANACOL Elecolit 3024
Electrically Conductive Adhesive | Snap Cure at High Temperatures, Pot Life: 8 h, Cures at as Low as 80 °C
PANACOL Elecolit 3025
Elecolit® 3025 is a silver-filled, solvent-free two component epoxy resin adhesive. It can be processed with a dispenser or punch. Curing is carried out at room temperature. Very short curing ...
PANACOL Elecolit 3036
Elecolit® 3036 is a silver-filled, solvent-free two component epoxy resin adhesive. It can be processed with a dispenser or with a punch. Curing is carried out at room temperature. Very short ...
PANACOL Elecolit 3043
Electrically Conductive Adhesive | Very low Viscosity, Good Dispensability, Small Fillers Ag<10 μ, Low Ion Content
PANACOL Elecolit 3061
Anisotropically Conductive Adhesive | Anisotropic Electrically Conductive, Ion Pureness < 10 ppm
PANACOL Elecolit 3063
Elecolit® 3063 is a UV and light-curing, one component anisotropic conductive adhesive with good adhesion to PET, Kapton, Mylar and other substrates for the production of flexible circuits. In thin ...
PANACOL Elecolit 3064
Elecolit® 3064 is a UV and light-curing, one component anisotropic conductive adhesive with good adhesion to PET, Kapton, Mylar and other substrates for the manufacture of flexible circuits. In ...
PANACOL Elecolit 3065
Elecolit® 3065 is a UV light, light and thermally curing one part anisotropic conductive adhesive with excellent adhesion on PET foils, capton, mylar and other substrates used in the production of ...
PANACOL Elecolit 323
Elecolit® 323 is a silver-filled 2 part epoxy adhesive specially developed for the bonding of open chip components. Elecolit® 323 is semiconducting (Na +, K +, Cl- <10ppm) and passed the ...
PANACOL Elecolit 325
Elecolit® 325 is a silver-filled, solvent-free 2-component epoxy resin adhesive. It can be used with dispenser or punch. Very short curing times are possible at elevated temperatures. ...
PANACOL Elecolit 327
Elecolit® 327 is a silver-filled one component polyimide adhesive which is characterized by its high temperature resistance. It has excellent adhesion to gold, aluminum, tantalum, germanium and ...
PANACOL Elecolit 336
Elecolit® 336 is a silver-filled, solvent-free two component epoxy resin adhesive. It can be processed with a dispenser, a stamp or screen printing. Curing is carried out at room temperature. ...
PANACOL Elecolit 342
Elecolit® 342 is a one component silver- filled electrical conductive coating agent with good glass, metal and plastic adhesion. It is solvent-based and can be used with brush, dispenser or needle ...
PANACOL Elecolit 3653
Elecolit® 3653 is a silver-filled, solvent-free, one-part, electrically and thermally conductive epoxy adhesive. It is used in applications that are subject to vibrations or rapid temperature ...
PANACOL Elecolit 3655
Elecolit® 3655 is a one-component, silver filled, solvent-free, low-viscosity conductive adhesive. Due to the small grain size (<10μm) of the silver particles it can be dosed well, even with ...
PANACOL Elecolit 414
Elecolit® 414 is a single component silver-filled, electrical conductive coating substance, that hardens into a flexible, chemical resistant, elastic film. When used with common plastics ...
PANACOL Elecolit 6207
Elecolit® 6207 is a 2-component thermal conductive epoxy resin potting and capping compound that cures at low temperatures or at room temperature. It is tested for UL-94V-0 (1/4 ...
PANACOL Elecolit 6601
Elecolit® 6601 is a single component thermally conductive adhesive with excellent metal bonding, which can also be used as a casting resin. Elecolit® 6601 is a product with excellent flowing ...
PANACOL Elecolit 6603
Elecolit® 6603 is a thermal conductive, slightly flexible adhesive with very good metal adhesion, which can also be used as a potting compound. Elecolit® 6603 is a one-component, has a good ...
PANACOL Elecolit 6604
Elecolit® 6604 is a one component epoxy adhesive with excellent mechanical properties and excellent thermal conductivity. Elecolit® 6604 has a good flow behavior and can be processed with a ...
PANACOL Elecolit 6607
Elecolit® 6607 is a one component, thermally conductive adhesive with excellent metal bonding. Elecolit® 6607 can be cured at 80°C within one hour. It can be processed via dispenser, screen ...
PANACOL Elecolit 6616
Elecolit® 6616 is a high-strength, two-component thermal conductive adhesive based on epoxy resin. It shows an excellent combination of shear and peel strength. Elecolit® 6616 ...
PANACOL Structalit 5604
Structalit® 5604 is a thermal curing, one component SMD adhesive, showing fast curing properties at low temperatures. The SMD adhesive shows a solid shock behavior. The material can be applied by ...
PANACOL Structalit 5605
Structalit® 5605 is a thermal curable one-component SMD adhesive with extremely fast curing at low temperatures. The adhesive is characterized by good shock resistance. The application is ...
PANACOL Structalit 5800
Structalit® 5800 is a universal two-component epoxy adhesive which is also used as a potting compound. Depending on the application area, Structalit® 5800 can be cured thermally or at ...
PANACOL Structalit 5810
Structalit® 5810 is suitable for bonding, coating and potting of metals, glass and many plastics. It has good adhesion to PC in case of thermal shock. Structalit® 5810 has good ...
PANACOL Structalit 5820
Structalit® 5820 is a universal one-component epoxy adhesive. The mean viscosity setting allows a wide range of applications. It is particularly suitable for the bonding of materials with similar ...
PANACOL Structalit 5830
Structalit® 5830 is a one-component epoxy adhesive with very good adhesion to metal. It is used with particularly high demands on impact strength, bending strength and peel resistance. The product ...
PANACOL Structalit 5845
Flexible Sealant, Filled, Good Flexibility
PANACOL Structalit 5890
Structalit® 5890 is a black thermal curable one-component glob-top compound with fast curing at low temperature and good thermal conductivity. It is characterized by good shock resistance. ...
PANACOL Structalit 5891
Structalit® 5891 is a black, thermal curable and one-component glob-top compound with fast curing at low temperature and good storage stability. The product is characterized by good shock ...
PANACOL Structalit 5892
Structalit® 5892 is a thermal curable one-component glob-top compound with fast curing at low temperature. The product is characterized by good shock resistance. It is designed for bonding, ...
PANACOL Structalit 5893
Structalit® 5893 is a thermal curable one-component epoxy-based adhesive with fast curing at low temperature. It is characterized by good shock resistance. Structalit® 5893 contains fillers ...
PANACOL Structalit 5894
Structalit® 5894 is a thermal curable one-component glob-top compound with fast curing at low temperature and good storage stability. The product is characterized by good shock resistance. It is ...
PANACOL Structalit 701
Structalit® 701 is a two part, thermal curing epoxy adhesive. The product appears amber and transparent in thin layers. It has good bonding to a wide range of materials including metals (alumina, ...
PANACOL Structalit 8801
Structalit® 8801 is a universal one-component epoxy adhesive which can also be used as a potting compound. The mean viscosity setting allows a wide range of applications. Structalit® 8801 ...
PANACOL Structalit 8804
Structalit® 8804 is a universal one-component epoxy adhesive which can also be used as a potting compound. The product is particularly suitable for the bonding of materials with similar ...
PANACOL Structalit 8805
Structalit® 8805 is a universal one-component epoxy adhesive which can also be used as a potting compound. It has excellent flow characteristics, flows into narrow gaps and has been developed for ...
PANACOL Vitralit 1517 Optic
Typical Applications: Lens Fixation, Optical Application and Builidings Viscosity (mPas): 90,000 - 120,000 Temperat. Resist. (ºC): -40 to +180 Curing: UV / Thermal ...
PANACOL Vitralit 1600 LV Smart Card
Vitralit® 1600 LV is a UV-curable epoxy resin which has been specially developed for use in electronics and electrical engineering as glob-top. As a special feature, it has a thermal initiator, ...
PANACOL Vitralit 1605 UV curable epoxy resin
Vitralit® 1605 is a UV-curable epoxy resin. As a special feature Vitralit® 1605 has a thermal initiator, which enables subsequent curing of shadow areas. Vitralit® 1605 is characterized by a very ...
PANACOL Vitralit 1650 Smart Card
Vitralit® 1650 is an epoxy-based glob-top adhesive and encapsulant especially developed for chip protection. It features a high purity and a low ionic concentration (Na+, K+, CI- <5ppm). ...
PANACOL Vitralit 1657 Electronic Adhesive
Vitralit® 1657 is a UV-curable epoxy resin specially developed for use in electronics and electrical engineering. It is distinguished by high purity and a low ion content (Na +, K +, Cl- ...
PANACOL Vitralit 1671 Smart Card
Vitralit® 1671 is a UV-A curing dam material on an epoxy resin basis. As a special feature, the product has a thermal initiator which allows for subsequent curing in shadow areas. The dam can be ...
PANACOL Vitralit 1680 Smart Card
Vitralit® 1680 is a UV-A curing epoxy resin that has been specifically developed as a glob-top chip cover. It offers the advantages of the chip cover materials of the 1st generation, but it has a ...
PANACOL Vitralit 1688 Smart Card
Vitralit® 1688 is a UV-curing epoxy resin. It has been specially developed as a glob-top chip cover. The product is characterized by outstanding purity and low ion content (Na *, K +, Cl- ...
PANACOL Vitralit 1691 Electronic Adhesive
Vitralit® 1691 is a UV-curable, black-colored epoxy resin, which is used as a glob-top. As a special feature the product has a thermal initiator, which allows the subsequent curing of shadow ...
PANACOL Vitralit 1702 Medical Equipment
Vitralit® 1702 is a low viscosity UV curing and transparent acrylate adhesive. Features such rapid cure, and wicking grade viscosity make the product a good choice for many high volume ...
PANACOL Vitralit 1722 Potting
Vitralit® 1722 is a UV-curing epoxy resin. It has excellent adhesion to most thermoplastics. The use of Vitralit® 1722 is recommended especially for plastics that tend to break when using ...
PANACOL Vitralit 2008 Dome Coating
Vitralit® 2008 is a cationic coating compound based on epoxy resin, featuring low flow characteristics and therefore enabling a perfect flange. The product can be cured with UV-light and shadowed ...
PANACOL Vitralit 2009 F Electronic Adhesive
Vitralit® 2009 F is a combined cationic UV- and thermally curable coating compound, based on epoxies. The surface is dry after UV curing. Stability will be reached once the coating has cooled down. ...
PANACOL Vitralit 2020 Dome Coating
Vitralit® 2020 is a UV-curable epoxy resin. The surface is dry after UV curing, the strength is adjusted with cooling of the coating. Vitralit® 2020 is particularly suitable as a hard, ...
PANACOL Vitralit 2655 Electronic Adhesive
Vitralit® 2655 is an UV light cure, low viscosity, flexible and transparent adhesive. It was designed for bonding and coating of many substrates. It has good adhesion to a wide range of materials ...
PANACOL Vitralit 2665 Electronic Adhesive
Typical Applications: Flip-Chip Underfiller Viscosity (mPas): 3,000 - 5,000 Temperat. Resist. (ºC): -55 to +175 Curing: UV / Thermal Color: Transparent ...
PANACOL Vitralit 4282 mod/2 Metal Bonding
Vitralit® 4282 mod2 is an anaerobic threadlocker / retainer which could be fixed immediately with exposure to UV light. The material is designed for bonding of metals. After initial fixation with ...
PANACOL Vitralit 4451 Electronic Adhesive
Vitralit® 4451 is a UV - curable urethane acrylate for conformal coating applications. The product has an excellent corrosion protection and is due to its flexibility suitable for flexible ...
PANACOL Vitralit 4731 Plastic Bonder
Vitralit® 4731 is a medium viscosity, flexible and transparent adhesive. It was designed for plastic and plastic/glass bonding and has good adhesion to a wide range of other materials including ...
PANACOL Vitralit 4731 VT Plastic Bonder
Vitralit® 4731 VT is a flexible and transparent adhesive. It was designed for plastic and plastic/glass bonding and has good adhesion to a wide range of other materials including ceramics and ...
PANACOL Vitralit 4732 VT Electronic Adhesive
Vitralit® 4732 VT is a UV and light-curing adhesive with very good adhesion to metals, glass, ceramics and many plastics. The product is distinguished in the combination PMMA / glass. The ...
PANACOL Vitralit 5607 SMD
Typical Applications: UV Fixation of SMD Parts Viscosity (mPas): 1,000,000 - 2,000,000 Temperat. Resist. (ºC): -40 to +150 Curing: UV / Thermal + Activ. Color: Red ...
PANACOL Vitralit 6104 Potting
Vitralit® 6104 is a UV-curable adhesive which is characterized by good adhesion to metals and sintered materials. As a special feature, the product has a thermal initiator which allows you to cure ...
PANACOL Vitralit 6104 VT Electronic Adhesive
Vitralit® 6104 VT is designed for "corner bonding" of electronic components on a PCB. The product cures very fast with exposure to UV-light. Vitralit® 6104VT shows very good adhesion to a ...
PANACOL Vitralit 6108 T Medical Equipment
Vitralit® 6108 is a low viscosity, UV/Visible light and thermal curing acrylic adhesive. It is transparent and non-yellowing after UV exposure. The product provides flexible curing conditions. ...
PANACOL Vitralit 6125 Metal Bonding
Vitralit® 6125 is a UV-curing acrylate adhesive which is distinguished by its versatility. As a special feature the product has a thermal initiator and a chemical activator, which allows subsequent ...
PANACOL Vitralit 6128
Vitralit® 6128 is a solvent-free, one-component, UV-curing acrylate adhesive. As a special feature the product has a thermal initiator and a chemical activator, which allows subsequent curing of ...
PANACOL Vitralit 6128 VT
Vitralit® 6128 VT is characterized by a wide range of applications with good adhesion to glass, metals and many thermoplastics as well as good temperature resistance. As a special feature ...
PANACOL Vitralit 6133 Glass Bonding
Vitralit® 6133 is a UV and light-curing acrylate adhesive which has been specially developed for glass bonding. It is an adhesive with high strength and impact resistance. It is ...
PANACOL Vitralit 6137 Electronic Adhesive
Vitralit® 6137 is a UV-curing acrylate adhesive which is characterized by good chemical resistance, a high temperature application range and outstanding thermal conductivity. As a special feature ...
PANACOL Vitralit 7041 F Medical Equipment
Vitralit® 7041 F is a low viscosity, UV and/or light cure, and transparent acrylate adhesive. It is specially designed for plastic bonding. The product provides excellent adhesion to PC, ABS or ...
PANACOL Vitralit 7561 Glass Bonding
Vitralit® 7561 is a flexible UV curing acrylate. It is used for large-area bonding, even with different materials. Because of its low water absorption, the product is especially suitable ...
PANACOL Vitralit 7562 Glass Bonding
Vitralit® 7562 is an elastic UV and light-curing adhesive which combines many substrates with very good peel strength. The cured product is optically clear, very flexible and particularly elastic. ...
PANACOL Vitralit 7641 Plastic Bonder
Vitralit® 7641 is a transparent, low-viscosity UV and light-curing acrylate-based adhesive. It has been specially developed for PMMA bonding. Its low viscosity makes the product ideal for ...
PANACOL Vitralit 9181 Wire Tacking
Vitralit® 9181 is a UV-acrylate with a dry surface. Its rapid curing in deep layers makes short cycle times possible in serial production. The product is used for large volume bonding, coating of ...
PANACOL Vitralit UC 1608 Optic
Typical Applications: Fiber Optics, Lenses, Optical Application Viscosity (mPas): 700 - 1,250 Temperat. Resist. (ºC): -40 to +175 Curing: UV / Thermal ...
PANACOL Vitralit UC 2017 Potting
Typical Applications: Sealing of Plugs, Switches and Relays, Fixing Parts Viscosity (mPas): 14,000 - 22,000 Temperat. Resist. (ºC): -40 to +150 Curing: UV ...
PANACOL Vitralit UC 6215 Optic
Vitralit® UC 6215 is a UV curing adhesive. The common application of the product is Bonding / Sealing / Encapsulation of difficult surfaces like PPS, PA, stainless steel, nickel, zinced steel as ...
PANACOL Vitralit UD 5134 Potting
Vitralit® UD 5134 is a UV and visible light curing adhesive. As a special feature, the product has a thermal initiator, which allows subsequent curing of shadow areas. Vitralit® UD 5134 is ...
PANACOL Vitralit UD 8559 LV Potting
Vitralit® UD 8559 LV is a UV and light-curing acrylate-based adhesive. The product adheres to many plastics and metals and is very suitable as a potting compound and for coating components. ...
PANACOL Vitralit UV 2113 Wire Tacking
Typical Applications: Thermoplastics Viscosity (mPas): 19,000 - 32,000 Temperat. Resist. (ºC): -40 to +150 Curing: UV / VL Color: Grey-Yellow Characteristics: Good ...
PANACOL Vitralit UV 2725 Glass Bonding
Vitralit® UV 2725 is a flexible, solvent-free UV-curing acrylate adhesive. The product is specially developed for glass bonding. It is distinguished by its particularly good peel strength and high ...
PANACOL Vitralit UV 2771 Glass Bonding
Typical Applications: Hard Glass-Glass/Metal (Alu/St. Steel), Temp./Lam. Glass Viscosity (mPas): 2,000 - 3,500 Temperat. Resist. (ºC): -20 to +120 Curing: UV / VL ...
PANACOL Vitralit UV 3675 Dome Coating
Typical Applications: Dome Coating Epoxy Based Viscosity (mPas): 150 - 250 Temperat. Resist. (ºC): -40 to +120 Curing: UV / VL Color: Clear, Colorless ...
PANACOL Vitralit VBB-1 Plastic Bonder
Typical Applications: Glass Bevel Bonds, Elast. Edge-to-Edge Bondig, Plastics/Glass Viscosity (mPas): 1,000 - 1,500 Temperat. Resist. (ºC): -50 to +150 Curing: UV / VL ...
PANACOL Vitralit VBB-N Glass Bonding
Vitralit® VBB-N is a transparent, very elastic, UV- and light-curing adhesive with high peel strength and with good adhesion to glass, steel, stainless steel, aluminum and many plastics. ...
Three Bond 2217H
The products Three Bond 2217H is an onecomponent epoxy resin, which have been specially developed for surface mounting, in order to keep the components in position on the printed circuit boards ...
Three Bond 2217L
Three Bond 2217L is one-component epoxy resin, which has been specially developed for surface mounting, in order to keep the components in position on the printed circuit boards during the placement ...
Three Bond 2274
The product Three Bond 2274 is a one-component epoxy resin which has been specially developed for surface mounting, in order to keep the components in position on the printed circuit boards during ...
ThreeBond 2271G
The product Three Bond 2271G is an one-component epoxy resin, which has been specially developed to provide Non Conductive Paste for Flip Chip bonding process. Features: Fast cure (for example ...