- You are here: Products> Chemical - Technical Products> Adhesives> Anaerobic adhesives
ANAEROBIC ADHESIVES
About Anaerobic Adhesives
Our range of anaerobic adhesives is formulated to provide superior performance benefits in applications with self-supporting orclosely-mating metallic components such as retaining bearings, ...
PERMABOND A011
Permabond A011 is an anaerobic adhesive designed for locking and sealing threaded or coaxially fitting metal parts where subsequent dismantling is required. Its controlled ...
PERMABOND A025
Permabond A025 is an anaerobic adhesive formulated to provide permanentlocking and sealing ofmetal partssuch as bearings, gears,studs and otherthreaded components. It has been ...
PERMABOND A1024
Permabond A1024 is designed specifically for bulletsealingapplications where the adhesive can be postapplied to wick down between bullet and cartridgecasing. Its low surface tension and low ...
PERMABOND A1042
Permabond A1042 is a rapid curing adhesive designed tolock and seal metal parts that subsequently may need tobe dismantled for maintenance. The high vibrationresistance makes Permabond A1042 ...
PERMABOND A1044
Permabond A1044 is a rapid curing sealant designed tolock and seal metal pipe connections, offering very goodresistance to even the most aggressive chemicals.Permabond A1044 can be used to seal ...
PERMABOND A1046
Permabond A1046 is a rapid curing adhesivedesigned to provide permanent locking and sealingof metal parts such as bearings, gears, pulleys andthreaded components. It exhibits high strength ...
PERMABOND A1058
Permabond A1058 is a highly viscous anaerobic sealant designedfor use on threaded metal pipe connections carrying a widevariety of gases and liquids. Suitable for use on both parallel ...
PERMABOND A1062
Permabond A1062 is a single component anaerobicadhesive. It cures in closely fitting joints in the presence ofmetal and exclusion of oxygen. It has a secondary curefeature which allows the ...
PERMABOND A113
Permabond A113 is designed for the locking and sealing of metal parts, suited for use on components that need to be dismantled for maintenance. Giving outstanding vibration resistance it can be used ...
PERMABOND A118
Permabond A118 is an anaerobic adhesive designed to provide permanentlocking and sealing ofmetal partssuch as bearings, gears,studs and otherthreaded components. It exhibits high strength, excellent ...
PERMABOND A126
Permabond A126 is a high‐strength anaerobic adhesive for permanent assembly of coaxial assemblies orthreadedmetal components. The exceptionally low viscosity ofthis ...
PERMABOND A129
Permabond A129 is a medium‐strength thixotropic (nondrip), anaerobic adhesive. It is specifically designed for use on coarse threads. Because of its viscosity and its strength ...
PERMABOND A130
Permabond A130 is ideally suited for use on componentsthat need to be dismantled for maintenance. Givingoutstanding vibration resistance, it can be used to replacea wide range of mechanical ...
PERMABOND A131
Permabond A131 is an anaerobic adhesive designed toseal threaded metal pipe connections carrying a widevariety of gases and liquids, including potable water.Suitable for use on both parallel ...
PERMABOND A134
Permabond A134 is a high‐strength anaerobic productdesigned for the permanent locking and sealing of metalparts. Its non‐drip formulation makes it suitable for useon larger fittings, ...
PERMABOND A136
Permabond A136 is an anaerobic material designed formaking 'formed in situ' gaskets between metal surfaces. Itis capable of replacing a wide range of conventionalgaskets thereby offering ...
PERMABOND A905
Permabond A Surface Activator (A905) is used inconjunction with Permabond A (anaerobic)adhesives and sealants. A905 is designed to allow non‐metallic surfaces to bebonded/sealed. It also ...
PERMABOND F201
Permabond F201 is an anaerobic adhesive which has beendeveloped to give excellent resistance to peel and impactforces. This toughening, combined with good adhesion toaluminium and copper ...
PERMABOND F202
The unique toughening process incorporated intoPermabond F202 gives this anaerobic adhesive excellentresistance to peel and impact forces. Primarily designedfor use on metal surfaces, it is ...
PERMABOND HH131
PERMABOND HH131 is a very high temperatureresistant, high strength anaerobic threadlocker andsealant. This material cures in the absence of airbetween tight fitting metal parts. It is used ...
PERMABOND HH167
PERMABOND HH167 is a high viscosity gap fillingsilver paste, which can be used for repairing metalmachinery parts. It is ideal for repairing worn shafts,broken threads, damaged keyways and ...
PERMABOND HM129
PERMABOND HM129 is a high strength mediumviscosity anaerobic threadlocker and sealant. Thismaterial cures in the absence of air between tightfitting metal parts. Cure is fast and reliable on ...
PERMABOND HM135
Permabond HM135 is a fast curing, medium viscosityanaerobic adhesive for locking and sealing threadsand retaining cylindrical components. It givesmaximum torque strength on brass or plated ...
PERMABOND HM146
Permabond HM146 is a high strength anaerobic adhesivesuitable for locking and sealing threaded pipeconnections. It has DIN‐DVGW approval for threaded gasconnections and KTW‐DVGW approval ...
PERMABOND HM162
PERMABOND HM162 is a medium viscosity retainingcompound that cures when confined between metalparts to form an extremely tough bond. It is bestsuited for cylindrical parts and where ...
PERMABOND HM165
PERMABOND HM165 is a high viscosity anaerobicretaining compound that cures when confinedbetween metal parts to form a tough bond. It is bestsuited for cylindrical parts and where ...
PERMABOND LH197
PERMABOND LH197 is an anaerobic materialdesigned for making “formed in situ” gasketsbetween metal surfaces. It is highly flexible, makingit ideal for dissimilar surfaces where ...
PERMABOND MH052
PERMABOND MH052 is ideal for the sealing ofthreaded joints. It is approved for use with gas forworking pressure up to 26 bar and also for gaseousoxygen up to 10 bar and 60°C. MH052 seals ...
PERMABOND MH196
PERMABOND MH196 is an anaerobic materialdesigned for making “formed in situ” gasketsbetween metal surfaces. It is capable of replacing awide range of conventional gaskets, thereby ...
PERMABOND MH199
PERMABOND MH199 is an anaerobic materialdesigned for making “formed in situ” gasketsbetween metal surfaces. It is capable of replacing awide range of conventional gaskets, thereby ...
