MAXIMATOR Filters 4500 bar

You are here: Products> Machines & Industrial Hydraulics> High pressure components and systems for liquids, gas and air> Valves, fittings and tubings> MAXIMATOR Filters 4500 bar

Select productMAXIMATOR - Valves, Fittings & Tubings - General InformationMAXIMATOR Check Valves 1500 barMAXIMATOR Check Valves 4500 barMAXIMATOR Filters 1500 barMAXIMATOR Filters 4500 barMAXIMATOR Fittings 10500 barMAXIMATOR Fittings 1500 barMAXIMATOR Fittings 4500 barMAXIMATOR High Pressure TubingsMAXIMATOR Pipe Valves, Fittings and NippleMAXIMATOR Sour Gas ProductsMAXIMATOR Valves 1500 barMAXIMATOR Valves 2500 barMAXIMATOR Valves 4500 barMAXIMATOR Valves 7000 bar

EN AT DE HU SI SK HR 

MAXIMATOR FILTERS 4500 BAR

Send enquiry for this product!

General information:

MAXIMATOR dual-disc line filters
MAXIMATOR dual-disc line filters of the 4,500 bar series filter gases and fluids to a max. pressure of 4,500 bar.

Thus, sensitive components are protected. Filter elements may be easily replaced on site.

Filters are supplied complete with collars and glands. The indicated filter level is ensured by structural measures.

Technical data:

Body material - 316 L (1.4404)
Collar material - 316 L (1.4404)
Gland material - 316 L (1.4404)
Filter surface - 0.08 in² (50mm²) (1/4” and 3/8”)
                      0.15 in² (95 mm²) (9/16”)
Temperature - – 50°C to + 350°C
Connection - 4HF; 6HF; 9HF

Advantages:

• Two step filtration
• Larger particles do not clog the fine filter (cascade filtration)

MAXIMATOR cup-type line filters
MAXIMATOR cup-type line filters of the 4,500 bar series filter solids from gases and fluids up to a max. pressure of 4,500 bar.

Thus, sensitive components are protected. Filter elements may be easily replaced on site.

Filters are supplied complete with collars and glands. The indicated filter level is ensured by structural measures.

Technical data:

Body material - 316 L (1.4404)
Collar material - 316 L (1.4404)
Gland material - 316 L (1.4404)
Filter surface - 0.82 in² (530mm²)
Temperature - – 50°C to + 350°C
Connection - 4HF; 6HF; 9HF

Advantages:

• Large filter surface

MAXIMATOR angle filters
MAXIMATOR angle filters of the 4,500 bar series filter solids from gases and fluids up to a max. pressure of 4,500 bar.

Thus, sensitive components are protected. Filter elements may be easily replaced on site.

Filters are supplied complete with collars and glands. The indicated filter level is ensured by structural measures.

Technical data:

Body material - 316 L (1.4404)
Collar material - 316 L (1.4404)
Gland material - 316 L (1.4404)
Filter surface - 0.82 in² (530mm²)
Temperature - – 50°C to + 350°C
Connection - 4HF; 6HF; 9HF

Advantages:

• Large filter surface

• Filters can be replaced in installed state

Pdf:

• catalogue maximator valves fittings and tubing.pdf
• catalogue vft chapter 3 high pressure.pdf