General information:MAXIMATOR ADVANTAGES AT A GLANCE
- Engineering and Production exclusively in Germany
- Wide range of Products available
- Short delivery times due to highly flexible manufacturing
- Certificates (Declaration of manufacturer, ATEX, etc.) for all Products readily available
Based on decades of experience in the field of high pressure technology MAXIMATOR manufactures valves and fittings for the chemical industry, water-jet cutting, power systems and test bench manufacture.
Clean and modern manufacturing:A modern manufacturing operation has been established at our Nordhausen factory. The plant complies, especially in the high-pressure area, with all requirements to ultra-clean production and thus ensures highest fabrication and quality standards.
The MAXIMATOR team is highly qualified and experienced in high-pressure technologies. Following final inspection the components are shrink wrapped which guarantee dust-free delivery to their destinations.
Guaranteed traceability:Continuous marking ensures proper traceability of all MAXIMATOR Valves and Fittings. Following product relevant datas are marked by a sophisticated laser device.
- Type
- Order Code
- Maximum Working Pressure
- ø High Pressure Tube
- Material
- Batch Number
Continuous test at 5,000 bar / 72,500 psiPrior to serial release MAXIMATOR high pressure valves of the 4,500 bar / 65,000 psi series are subjected to an extensive functional test at 5,000 bar / 72,500 psi.
A number of valves are simultaneously tested, as shown in the picture.
The tested valves are continuously actuated and thus facilitate different pressure loads.
Thus, the HP bodies, bolted unions and HP sealings are tested under pressure.
Also after very frequent opening and shutting, MAXIMATOR high pressure valves prove their tightness and smooth running
.
Pulse tests 4,000 bar / 58,000 psi, 10 HzThese MAXIMATOR pulse test rigs are used to test MAXIMATOR high pressure valves at 4,000 bar / 58,000 psi and 10 Hz.
Thus, the permanent stress cycle strength of MAXIMATOR high pressure valves is proven, which is an integral element of the QA/QC system at MAXIMATOR.
Application example of a packaged pump systemThe MAXIMATOR high pressure program is put to a large variety of uses. Some components have been installed into a MAXIMATOR high pressure unit for a max. 5,500 bar / 79,000 psi.
Smooth running and a sturdy design ensure that MAXIMATOR high pressure valves are fully functionable also under the most adverse operating conditions.
Application example of a booster stationThis booster station compresses gases to 500 bar / 7,250 psi. Here, it is of utmost significance to employ reliable connecting elements.
The compressed gas is first led into a cross and then via a tee on to the accumulator.
The gas may be supplied to a consumer from the tee. It is also possible to use an additional valve to supply further consumers.
Overview:Valves 1500 bar- MAXIMATOR valves of the 21V series have a cold-machined stainless steel body. Valve bodies are available in six different designs and can be equipped with regulating stem.
- A special feature is the non-rotating stem which ensures a long life and thus a high reliability of the valve.
Fittings 1500 barMAXIMATOR fittings and gland assemblies of the 1,500 bar series are designed for simple and safe connection of HP pipes up to a max. pressure of 1,500 bar.
Filters 1500 bar- MAXIMATOR dual-disc line filters of the 1,500 bar series filter gases and fluids to a max. pressure of 1,500 bar.
- MAXIMATOR cup type filters of the 1,500 bar series filter solids from gases and fluids up to a max. pressure of 1,500 bar.
Check Valves 1500 bar- All MAXIMATOR ball check valves have a long endurance and may also be employed with high temperatures.
- The characteristic feature of MAXIMATOR is their non-leakage sealing. All common O-Ring materials can be used as appropriate for different media and application temperatures.
Valves 2500 barMAXIMATOR valves of the 36V series have a cold-machined stainless steel body. Valve bodies are available in six different designs and can be equipped with regulating stem.
Valves 4500 barMAXIMATOR valves of the 65V series have a cold-machined stainless steel body. Valve bodies are available in six different designs and can be equipped with regulator spindles.
Fittings 4500 barMAXIMATOR fittings and bolted unions of the 4,500 bar series are designed for simple and safe connection of HP pipes up to a max. pressure of 4,500 bar.
Filters 4500 bar- MAXIMATOR dual-disc line filters of the 4,500 bar series filter gases and fluids to a max. pressure of 4,500 bar.
- MAXIMATOR cup-type line filters of the 4,500 bar series filter solids from gases and fluids up to a max. pressure of 4,500 bar.
- MAXIMATOR angle filters of the 4,500 bar series filter solids from gases and fluids up to a max. pressure of 4,500 bar.
Check Valves 4500 bar- MAXIMATOR ball check valves have a long endurance and may also be employed with high temperatures.
- The characteristic feature of MAXIMATOR O-Ring check valves is their non-leakage sealing. All common O-Ring materials can be used as appropriate for different media and application temperatures.
Valves 7000 barMAXIMATOR valves of the 101V series have a cold-machined stainless steel body. Valve bodies are available in three different designs and can be equipped with regulating stems.
Fittings 10500 barMAXIMATOR fittings and bolted unions of the 10,500 bar series are designed for simple and safe connection of HP pipes up to a max. pressure of 10,500 bar.
High Pressure Tubings- MAXIMATOR tubes are manufactured to special requirements and experiences and specifications conforming to high pressure technology.
- Tubes are made of stainless steel and seamless drawn and subjected to continual inspections. Tubes of other materials can be delivered upon request.
Pipe Valves, Fittings and Nipple- MAXIMATOR Pipe Valves of the 15V series have a cold-machined stainless steel body.
- Valve bodies are available in two different designs and can be equipped with regulating stem.
- A special feature is the non-rotating stem which ensures a long life and thus a high reliability of the valve.
Sour Gas Products- Maximator offers a complete line of high pressure valves, fittings, tubing, check valves and line filters, adapters and couplings for standard oil field service where H2S is present.
- All high pressure valves and fittings use the high pressure style connection.
