You are here: Products> Chemical - Technical Products> Electro chemicals> Potting resins
POTTING RESINS
ENCAPSULATION RESINS
Encapsulation Resin systems are designed to protect and insulate printed circuit boards (PCBs) and electronic components from the threats of harsh and challenging environments, including; moisture, ...
DOWSIL EI-2888 Primerless Clear Silicone Encapsulant
DOWSIL EI-2888 Primerless Clear Silicone Encapsulant is an patented innovative solution that will help you in addressing the processing and cost challenges by providing good primerless adhesion, ...
DOWSIL™ 3-4118 Gel
DOWSIL™ 3-4118 Gel Two-part, soft, clear gel, 1:1 mix ratio, high viscosity to limit flow out. Features & Benefits Clear gel High viscosity Room temperature cure that ...
DOWSIL™ 3-4133 Dielectric Gel Kit
DOWSIL™ 3-4133 Dielectric Gel Kit Two-part, clear, 1:1 mix ratio gel Features & Benefits Clear Fast heat cure Long working time and low viscosity aid process ...
DOWSIL™ 3-4150 Dielectric Gel Kit
DOWSIL™ 3-4150 Dielectric Gel Kit Two-part, transparent green, fast RT or heat cure. Features & Benefits Fast room temperature cure Two parts are blue and yellow and ...
DOWSIL™ 3-4150 Dielectric Gel Kit
DOWSIL™ 3-4150 Dielectric Gel Kit Two-part, transparent green, fast RT or heat cure. Features & Benefits Fast room temperature cure Two parts are blue and yellow and ...
DOWSIL™ 3-4154 Dielectric Gel Kit
DOWSIL™ 3-4154 Dielectric Gel Kit Two-part, clear, RT or heat cure. Features & Benefits Clear Fast heat cure Fast heat cure for increased processing ...
DOWSIL™ 3-4155 HV Dielectric Gel Kit
DOWSIL™ 3-4155 HV Dielectric Gel Kit Two-part, transparent green, fast RT or heat cure, UV indicator, high viscosity, and low temperature (-80°C/112°F) stability. Features & ...
DOWSIL™ 3-4170 Dielectric Gel Kit
DOWSIL™ 3-4170 Dielectric Gel Kit Two-part, clear, heat cure, long working time. Features & Benefits Clear Fast heat cure Long working time and low ...
DOWSIL™ 3-4207 Dielectric Tough Gel
DOWSIL™ 3-4207 Dielectric Tough Gel Two-part, translucent green, 1:1 mix ratio, fast room temperature cure tough gel with UV indicator, conditional primerless adhesion and good flame ...
DOWSIL™ 3-4222 Dielectric Firm Gel Kit
DOWSIL™ 3-4222 Dielectric Firm Gel Kit Two-part, translucent green, firm, fast RT or heat cure, and primerless chemical adhesion. Features & Benefits Fast room ...
DOWSIL™ 3-4241 Dielectric Tough Gel Kit
DOWSIL™ 3-4241 Dielectric Tough Gel Kit Two-part, translucent green, RT or heat cure, UV indicator, long working time, tough primerless chemical adhesion, UL 94 V-1 flammability ...
DOWSIL™ 3-4680 Silicone Gel Kit
DOWSIL™ 3-4680 Silicone Gel Kit Two-part, transparent blue, fast RT or heat cure, low viscosity. Features & Benefits Fast room temperature cure Transparent ...
DOWSIL™ 3-6121 Low Temperature Elastomer
DOWSIL™ 3-6121 Low Temperature Elastomer Two-part, clear, low temperature performance below -65C, high tear and tensile strength, high refractive index. Features & ...
DOWSIL™ 3-6371 UV Gel
DOWSIL™ 3-6371 UV Gel One-part, translucent amber, UV cure with moisture secondary cure (for shadow areas). Features & Benefits 1-part UV cure with moisture ...
DOWSIL™ 3-6635 Dielectric Gel
DOWSIL™ 3-6635 Dielectric Gel One-part, heat cure, with low temperature (-80°C/-112°F) stability Features & Benefits 1-part gel with no mixing required ...
DOWSIL™ 3-8264 Encapsulant Kit
DOWSIL™ 3-8264 Encapsulant Kit Two-part, black, 1:1, heat cure, low viscosity, self-priming at moderate temperatures. Features & Benefits 1:1 mix ratio ...
DOWSIL™ 93-500 Space Grade Encapsulant Kit
DOWSIL™ 93-500 Space Grade Encapsulant Kit Transparent space grade encapsulant Features & Benefits 10:1 mix ratio Flowable Low levels of volatile ...
DOWSIL™ 93-500 Thixotropic Kit
DOWSIL™ 93-500 Thixotropic Kit Two-part, 10:1 mix, translucent-white space grade encapsulant. Features & Benefits 10:1 mix ratio Thixotropic Very low levels of volatile ...
DOWSIL™ CN-8760 Thermally Conductive Encapsulant
DOWSIL™ CN-8760 Thermally Conductive Encapsulant Two-part, 1 to 1, room temperature and heat curable to give manufacturing flexibility, gray elastomer with moderate thermal ...
DOWSIL™ EE-1010 Low Viscosity Encapsulant Kit
DOWSIL™ EE-1010 Low Viscosity Encapsulant Kit Suitable for use in applications where there are frequent start/stops during the manufacturing process or where board and component ...
DOWSIL™ EE-1840 A&B Kit
DOWSIL™ EE-1840 A&B Kit Two part, 1:1 mix ratio black encapsulant Features & Benefits RTV (room temperature vulcanization) or heat cure No exotherm ...
DOWSIL™ EE-3200 Low Stress Silicone Encapsulant
DOWSIL™ EE-3200 Low Stress Silicone Encapsulant Two-part, 1 to 1 mix ratio, low viscosity encapsulant Has a very low hardness and viscosity to minimize internal stress generation, fill small gaps, ...
DOWSIL™ EG-3000 Thixotropic Gel Parts A&B
DOWSIL™ EG-3000 Thixotropic Gel Parts A&B Two-part, heat cure, thixotropic gel. Features & Benefits Heat cure gel Thixotropic to allow selective and ...
DOWSIL™ EG-3810 Dielectric Gel
DOWSIL™ EG-3810 Dielectric Gel One-part, low/high temperature gel DOWSIL™ EG-3810 Gel delivers long-lasting performance as a protective potting material for power ...
DOWSIL™ EG-3896 Kit
DOWSIL™ EG-3896 Kit Suitable for potting and protecting of electronics devices, especially power semiconductor modules to protect dies and interconnects from environmental conditions ...
DOWSIL™ EI-1184 Optical Encapsulant
DOWSIL™ EI-1184 Optical Encapsulant A 1:1 mix ratio, fast curing, 2-part silicone encapsulant suitable for encapsulating rigid and flexible circuit boards indoor and outdoor LED Lighting ...
DOWSIL™ Q3-6575 Dielectric Gel A/B Kit
DOWSIL™ Q3-6575 Dielectric Gel A/B Kit Two-part, clear, RT or heat cure and low temperature (-80°C/-112°F)stability. Features & Benefits Fast heat cure ...
DOWSIL™ SE 1816 CV Kit
DOWSIL™ SE 1816 CV Kit Two-part, 1 to 1 mix, black encapsulant with good flame resistance and moderate thermal conductivity Application DOWSIL™ SE 1816 CV Kit is suitable ...
DOWSIL™ X3-6211 Encapsulant
DOWSIL™ X3-6211 Encapsulant One-part, clear, UV cure. Features & Benefits One-part UV cure gel with no mixing required Suitable for very low ...
ELECTROLUBE ER1122 - Amber
ER1122 is a general purpose, two-part, hot or cold curing resin with superior adhesive properties. The cured material is tough however flexibility can be adjusted by altering the amount of hardener ...
ELECTROLUBE ER1426 - Water White
ER1426 is a very low viscosity unfilled, two-part epoxy resin, designed for powder bonding and impregnation applications. The standard colour is water-white but other colours could be made available ...
ELECTROLUBE ER1450 – White and ER1451 Clear
This material is a fast curing epoxy resin of low viscosity. The cured product is tough and exhibits good adhesion to a variety of substrates. The system may be supplied in bulk, kit or resinpack ...
ELECTROLUBE ER2001 – Black
ER2001 is a flame retardant, general purpose, two part potting and encapsulating compound. The flame retardant technology used is of a ‘clean’ type leading to relatively low toxicity fumes and ...
ELECTROLUBE ER2074 – Epoxy Resin - White
ER2074 is a flame retardant, thermally conductive, two part potting and encapsulating compound. The flame retardant technology used is of a ‘clean’ type leading to relatively low toxicity fumes ...
ELECTROLUBE ER2136
ER2136 is a slightly thixotropic hot cure one-part epoxy system designed specifically for use as a dipping resin for hybrid circuits and discrete components. The standard colour is blue but other ...
ELECTROLUBE ER2162
ER2162 is a two-part flame retardant epoxy with excellent solvent resistance. The rigid and inert nature of this encapsulant lends itself ideally to the protection of electrical/electronic units ...
ELECTROLUBE ER2183 – Epoxy Resin - Black
ER2183 is a flame retardant, thermally conductive, two part potting and encapsulating compound.The flame retardant technology used is of a ‘clean’ type leading to relatively low toxicity fumes ...
ELECTROLUBE ER2188 – Black
ER2188 is a flame retardant, thermally conductive, general purpose, two part potting and encapsulating compound. The system utilises a hardener free of DDM or other aromatic amines. The flame ...
ELECTROLUBE ER2195 – Black
ER2195 is a flame retardant, general purpose, two part potting and encapsulating compound. The cured product exhibits a high degree of toughness and adhesion and is particularly suited to ...
ELECTROLUBE ER2218 – Low Viscosity, Flame Retardant Epoxy Resin
ER2218 is a low viscosity, flame retardant, two part potting and encapsulating compound.The product has been specifically designed for compatibility with reflow applications, therefore remaining ...
ELECTROLUBE ER2220 – Epoxy Resin
ER2220 is a flame retardant, thermally conductive, two part encapsulation compound based on epoxy technology. Designed to meet increasing demands for efficient thermal dissipation, ER2220 combines ...
ELECTROLUBE ER2223
High Temperature Resin ER2223 black epoxy resin has been specially formulated to meet the harsh operating conditions of under-hood applications in the automotive industry. It has excellent ...
ELECTROLUBE ER2225 Thermally Conductive High Temperature Resistant Epoxy Resin
Electrolube ER 2225 is a black epoxy potting compound formulated to meet the exacting requirements of the automotive industry, although will find application in a wide range of industries where high ...
ELECTROLUBE ER4001 White Epoxy Resin
ER4001 is a thermally conductive epoxy resin system which is highly temperature resistant, providing full protection up to 150°C. Thanks to its enhanced thermal conductivity; ER4001 is ideal for ...
ELECTROLUBE OP9020 – Machine and Resin Remover
OP9020 is a special solvent designed to remove epoxy and polyurethane resin in the uncured state from machines and work surfaces. OP9020 is a non-halogenated solvent offering lower toxicity than ...
ELECTROLUBE RRS - Resin Remover and Stripper
RRS is a special blend of solvents designed to swell and soften, or even dissolve cured coatings, epoxy, polyurethane and other resins and enable their removal from most substrates. RRS does not ...
ELECTROLUBE SC3001 – Optically Clear Two Part Silicone Compound
SC3001 is an optically clear, flexible, two part encapsulating compound. SC3001 is ideal for use in the LED industry where optical clarity is vital. It is particularly suited to applications where ...
ELECTROLUBE UR 5041
UR5041 is an ultra high performance resin system which features excellent resistance to sea water and low water absorption.
ELECTROLUBE UR 5044
UR5044 is a high performance, flame retardant encapsulation resin which has been developed primarily for encapsulation of delicate electronic and electrical components where conditions can be extreme ...
ELECTROLUBE UR 5048
UR5048 is a clear amber, flexible encapsulation resin which due to its ‘digoutable’ properties allows easy removal of cured material from broken or defective units. In most cases the clarity of ...
ELECTROLUBE UR5083
UR5083 is a very high performance resin system that has the unique ability to "self heal" when penetrated.This resin also has the ability to adhere to the case or unit device while slipping off the ...
ELECTROLUBE UR5097 – Black
UR5097 is a flame retardant, thermally conductive, two part potting and encapsulating compound. The cured polyurethane is particularly suited to applications with stringent temperature cycling or ...
ELECTROLUBE UR5528 – Black
UR5528 is a two-part potting and encapsulating compound with excellent water resistance properties making it suitable for a wide range of applications where water or moisture ingress may be a ...
ELECTROLUBE UR5547 – Black
UR5547 is a semi rigid, flame retardant polyurethane potting resin ideally suited to applications where small and delicate components are involved since the cured product exhibits very little stress, ...
ELECTROLUBE UR5598
UR5598 is a clear semi-flexible and durable resin. The low mixed system viscosity enables preparation of bubble free pottings and castings. Features High water resistance Good electrical ...
ELECTROLUBE UR5604 – Black
UR5604 is a two part, high performance polyurethane especially formulated for potting and encapsulating. Features Good Electrical Properties Excellent Adhesion Low Water ...
ELECTROLUBE UR5608 – Black
UR5608 is a two part, high performance polyurethane especially formulated for potting and encapsulating. The cured product exhibits a high degree of toughness and is particularly suited to ...
ELECTROLUBE UR5618
UR5618 is a two part, high performance polyurethane especially formulated for potting and encapsulating. The cured product exhibits a high degree of toughness and is particularly suited to ...
ELECTROLUBE UR5623 – White
UR5623 is a two part, high performance polyurethane especially formulated for potting and encapsulating. The cured product exhibits a high degree of toughness and is particularly suited to ...
ELECTROLUBE UR5634 - OPTICALLY CLEAR
Electrolube UR 5634 is a two-part, semi-rigid optically clear polyurethane resin ideal for use in decorative and protective applications. Key Properties: Carefully selected blend of ...
ELECTROLUBE UR5635
Electrolube UR 5635 is a two-part, semi-rigid polyurethane resin formulated with a ‘hazy/cloudy’ appearance. The product is ideal for use in decorative and protective applications, particularly ...
ELECTROLUBE UR5638
Transparent LED Resin UR5638 is an optically clear / transparent polyurethane resin consisting of an aliphatic polymer designed to provide excellent UV stability while at the same time excellent ...
ELECTROLUBE UR5640
UR5640 is a two-part, semi-rigid optically clear polyurethane resin ideal for use in protective applications. Due to a carefully selected blend of components an extremely durable, low viscosity ...
ELECTROLUBE UR7002 Yellow Polyurethane Resin
UR7002 is a two-part potting and encapsulation compound formulated for high performance. It exhibits a high degree of flexibility, ideal for encapsulating delicate electronics or components which it ...
FLUOROGEL™ 4-8022
FLUOROGEL™ 4-8022 One-part, translucent, heat cure, UV indicator, fuel and solvent resistant. Features & Benefits 1-part heat curing gel with no mixing ...
FLUOROGEL™ Q3-6679 Dielectric Gel Kit
FLUOROGEL™ Q3-6679 Dielectric Gel Kit Two-part, clear, RT or heat cure, solvent and fuel resistant. Features & Benefits Room temperature or heat cure Long ...
SYLGARD 170 Silicone Elastomer
SYLGARD 170 also known as Dow Corning SYLGARD 170 Silicone Elastomer is a two-part, 1:1 mix, black, general purpose encapsulant with good flowability, long working time and flame resistance, it is ...
SYLGARD 184 Transparent Encapsulant
SYLGARD 184 also known as Dow Corning Sylgard 184 is a transparent silicone based encapsulant with good flame resistance. It is especially suitable for encapsulation of LED Lighting ...
SYLGARD 567 Black
SYLGARD 567 Black also known as Dow Corning Sylgard 567 Black is a two-part, black, 1:1, heat cure, long working time, self-priming, UL and Mil Spec primerless silicone encapsulant kit. ...
SYLGARD™ 160 Silicone Elastomer Kit
SYLGARD™ 160 Silicone Elastomer Kit Two-part, 1 to 1 mix, dark gray, general purpose encapsulant with good flowability and flame resistance. Applications SYLGARD™160 Silicone ...
SYLGARD™ 164 Silicone Elastomer Kit
SYLGARD™ 164 Silicone Elastomer Kit Two-part, grey, 1:1, fast RT cure, general purpose, moderate thermal conductivity, UL. Applications SYLGARD™ 164 Silicone ...
SYLGARD™ 170 Fast Cure Silicone Elastomer Kit
SYLGARD™ 170 Fast Cure Silicone Elastomer Kit Two-part, black, 1:1, fast RT curing, low viscosity, general purpose, UL. Features & Benefits Low viscosity ...
SYLGARD™ 182 Silicone Elastomer Kit
SYLGARD™ 182 Silicone Elastomer Kit Two-part, clear, 10:1, heat cure, good strength, UL and Mil Spec, same as SYLGARD® 184 but with longer working time. Features & ...
SYLGARD™ 186 Silicone Elastomer Kit
SYLGARD™ 186 Silicone Elastomer Kit Two-part, translucent, 10:1, RT or heat cure, high tear strength, UL. Features & Benefits 10:1 mix ratio High viscosity ...
SYLGARD™ 3-6636 Silicone Dielectric Gel Kit
SYLGARD™ 3-6636 Silicone Dielectric Gel Kit Two-part, transparent, LED encapsulant. Features & Benefits Clear, fast heat curing gel High viscosity to limit flow ...
SYLGARD™ 527 A&B Silicone Dielectric Gel
SYLGARD™ 527 A&B Silicone Dielectric Gel A two-part, 1 to 1 mix ratio dielectric gel that is suitable for sealing and protecting various electronic devices, especially those with delicate ...
SYLGARD™ 528 Firm Gel Parts A&B
SYLGARD™ 528 Firm Gel Parts A&B Two-part, clear, heat cure, firm gel. Features & Benefits Heat cure Long working time and low viscosity aid process ...
SYLGARD™ 535 Thixotropic Dielectric Gel
SYLGARD™ 535 Thixotropic Dielectric Gel One-part, clear, heat cure, thixotropic gel. Features & Benefits 1-part heat cure gel with no mixing required ...
SYLGARD™ 537 One Part Dielectric Gel
SYLGARD™ 537 One Part Dielectric Gel One-part, clear, heat cure, low viscosity gel. Features & Benefits One-part gel with no mixing required Low ...