Cor-Ban 23 is designed to be a long lasting, high penetration, water displacing, corrosion inhibiting compound for use on high profile aircraft substrates; upper edge floor beams, wheel wells, pressure deck and center wing sections. The finished coating is non-tacky with a light reddish-pink tint. Cor-Ban 23 offers the fast dry time and thin film of BMS 3-23 and the long lasting corrosion inhibition properties of BMS 3-29.
Application:
The product can be applied by conventional airless, air assist, HVLP, and electrostatic spray equipment. The coating will self-level if applied on an incline to a dry film of 0.3-0.4 mils. Aerosol application is available. All properties represented were achieved with a dry film thickness of 0.3 mils.
Features:- Water Displacing
- Fast Drying Non-Tacky Film
- High Penetration
- >3000 hours salt spray
- Non-Cracking and Flaking to -65F
- Detectable Film
- Solvent Removable
Self-leveling to 0.3-0.4 mils dry film thickness
Physical Properties: - Viscosity (cps):26
- Flash Point (ºC): 114°F
- Specific Gravity:0.88
- Water Displacement:0% Rust
- Non-Volatile42%
- Drying Time:1 hour
- Color: Transparent Reddish-Pink Tint
- Exfoliation: Pass
- Solvent Type:Aliphatic
- Low Temp Flaking: Pass
- Penetration: over 4 inches per hour per BMS 3-35
- Compatibility Cd, Mg, AI: Pass
