Cookie Policy
The Ulbrich Group wants to offer you the best service possible. To achieve this, we save information about your visit in so-called cookies. By using this website, you consent to the use of cookies. You can click on the 'Additional information' button to find detailed information on the use of cookies on this website. You can also prevent cookies from being used by changing your browser settings.

Additional information

Continue
Select your country

ZIP-CHEM COR-BAN 35 UNDYED

EN AT CZ HU SI SK HR 


ZIP-CHEM COR-BAN 35 UNDYED

ZIP-CHEM COR-BAN 35 UNDYED

Send enquiry for this product!
Cor-Ban 35 Undyed is designed to be a long lasting, high solids, low volatiles, high penetration, water displacing, corrosion inhibiting compound for use on high profile aircraft substrates; upper edge floor beams, wheel wells, pressure deck and center wing sections. The finished coating is non-tacky with a light yellow tint. Cor-Ban 35 undyed offers the fast dry time and thin film of BMS 3-23 and the long lasting corrosion inhibition properties of BMS 3-29. Cor-Ban 35 undyed does have a UV absorber in the product.

Application:
The product can be applied by conventional airless or air-operated spray equipment. The coating should be applied at 1 - 1½ mils (25-38 microns) wet thickness. Aerosol application is available. All properties represented were achieved with a dry film thickness of 0.5 - 0.75 mils (12-19 microns). One aerosol can covers approximately 95 ft² (8.8 m² ) . Cured Cor-Ban 35 undyed can be removed with D-5615NS, D-5640NS, or mineral spirits.

Features:
  • Water Displacing 
  • Non-Sagging Thixotropic Film
  • High Penetration 
  • Fast Drying Non-Tacky Film 
  • Low VOC 
  • > 2000 hours salt spray 
  • Detectable Film 
  • Non-Cracking and Flaking to -40°F (-40°C) 
  • Solvent Removable 
  • High Solids > 51% 
  • Very low dry film weight < 1 mil required to surpass specification

Physical Properties 
  • Flash Point: 115°F 
  • Specific Gravity: 0.90 
  • Water Displacement: 0% Rust 
  • Non-Volatiles: 51% min. 
  • Material VOC: 395 g/L 
  • Drying Time: <1 hour 
  • Color: Transparent light yellow tint 
  • Exfoliation: Pass 
  • Solvent Type: Aliphatic 
  • Low Temp Flaking: Pass 
  • Penetration: BMS 3-23F pass 
  • Compatibility Cd, Mg, AI: Pass   

Send enquiry for this product!

ZIP-CHEM COR-BAN 35 UNDYED




Thank you for your enquiry!
We will contact you in shortest time possible.

© Copyright 2022 Ulbrich Group
HomeProductsNewsDownloadVideoPartnersAbout usSitemapDisclaimerTerms & ConditionsCookiesISO CertificationQuality policyPrivacy Policy
Back on top
https://www.ulbrich-group.com/,https://dir.ulbrich.si/,eng
Cookie Policy
The Ulbrich Group wants to offer you the best service possible. To achieve this, we save information about your visit in so-called cookies. By using this website, you consent to the use of cookies. You can click on the 'Additional information' button to find detailed information on the use of cookies on this website. You can also prevent cookies from being used by changing your browser settings.

Additional information

Continue