You are here: News> Product news> PERMABOND 2K MT3821 | New
PERMABOND 825 | New
PERMABOND 825 is a low viscosity modified ethyl cyanoacrylate suitable for applications where high temperature resistance is required. This material is fast setting and has good adhesion to rubber, metal and plastics. Permabond® 825 has excellent retention of strength during thermal ageing and it is resistant to temperatures of up to 200°C, without the need for a secondary heat cure. This makes it an ideal choice for high speed production lines, bonding components that need to ...
Smart system solution for needle bonding
A main field of application for adhesives in medical systems is needle bonding and syringe assembly – the bonding of stainless steel needles or cannulas into glass or plastic syringes. These needles are produced in large quantities which requires rapid and reliable bonding in high volume production. In addition to their mechanical bond strength, the adhesives used must allow high-precision production and permanent joining and must withstand various sterilization ...
DOWSIL CC-8030 UV and Moisture Dual Cure Conformal Coating | New
DOWSIL CC-8030 is a one-part, translucent, Medium Viscosity, UV and Moisture Dual Curable Coating. Features & BenefitsNo added solvents BTX solventless Low viscosity, sprayable Fast primary UV cure Secondary moisture cure for shadowed areas Non-oxygen inhibited formulation Elastomeric formulation improves reliability against stress Low modulus for delicate components UV indicator allows for easy or automated inspection UL 746E UL-94 ...
DOWSIL TC-3065 Thermal Gel | New
DOWSIL TC-3065 is a one-part, 6.5W/mk thermal conductivity silicone gel. It’s printable or dispensable to cure as a soft thermal gel to replace fabricated thermal pads for thermal transferring, stress relieving and shock damping. Room temperature curing, or accelerated curing at 60°C or higher temperature for shorter curing time.Features & BenefitsOne-part, gray, dispensable and curable thermal gel Re-workable after curing Room temperature curing or accelerated at 60°C or ...
DOWSIL TC-4040 Dispensable Thermal Pad | New
DOWSIL TC-4040 is a two-part, 1-to-1 mix ratio, blue color, thermally conductive dispensable thermal pad. It’s printable or dispensable to cure as a soft thermal gel to replace fabricated thermal pad for thermal transferring, stress relieving and shock damping. It could also be used as gap filler with reworkable performance. Features & BenefitsLiquid and curable thermal gel to form a soft thermal pad to help gap filling, heat dissipating, stress relieving and shock ...
PANACOL Vitralit UD 8052 F | New
Vitralit® UD 8052 F is a one component, no flow, UV/visible light and humidity curing isocyanate acrylate adhesive. The base material is transparent and slightly yellow. Customized versions with various colors are possible and make process control easier. Vitralit® UD 8052 F is specially designed as a flexible encapsulant for local circuit board protection. Its jetting dispensability and fast cure properties make it especially suitable for applications in consumer electronics, where ...
PERMABOND 2K ET5364 | New
PERMABOND® ET5364 is a two-part, 1:1 mixable epoxy adhesive with good adhesion to a variety of substrates such as wood, metal, ceramics and some plastics and composites. Permabond ET5364 forms tough bonds with excellent shear strength. Features & Benefits Adhesion to a wide variety of substrates Easy to apply High shear strength Good impact strength Good chemical resistance Non-drip rheology Permabond is responding to customers’ ...
PERMABOND 2K MT382 | New
PERMABOND® MT382 is a two-part, modified epoxy adhesive designed for sealing/bonding and potting applications. It has excellent adhesion to Nylon, ABS, Polycarbonate and other plastics as well as a variety of different metals. The product can be cured in different mix ratios depending on the flexibility required in the final cured product. MT382 is self-levelling. Features & Benefits Adhesion to a wide variety of substrates Full cure at room ...
PERMABOND 2K MT3809 | New
PERMABOND® MT3809 is a 10:1, two-part, modified epoxy adhesive designed for potting applications. It has excellent adhesion to Nylon, ABS, Polycarbonate and other plastics. When cured, this adhesive is soft and reasonably flexible. Its low viscosity makes it suitable for potting intricate parts. Features & Benefits Adhesion to a wide variety of substrates Full cure at room temperature Easy to apply Soft & flexible Self levelling Low ...
PERMABOND 2K MT3821 | New
PERMABOND® MT3821 is a 2:1, two-part, modified epoxy adhesive designed for sealing and bonding. It has excellent adhesion to Nylon, ABS, Polycarbonate and other plastics as well as a variety of different metals. When cured, this adhesive is soft and flexible. Features & Benefits Adhesion to a wide variety of substrates Full cure at room temperature Easy to apply Soft & flexible PERMABOND 2K MT3821
