International
Please visit Electrolube at the electronica 2014 from 11. - 15.11.2014 in MunichHall A6 stand 131: protection of electronic via coating and potting as well as lubricants for electrical contactsHall B1 stand 548: thermal-management-productsNew products: AFA non-aromatic acrylate-based coating HTCX silicone-free thermal grease LTC aroma-free protective coating for low temperature application ER2221 two-component epoxy resin ER1455 ...
Adhesive to bond high engineered materials with noabrasionProperties: Colour: grey (adhesive white, activator black)Mix ratio (by volume): 1:1Viscosity (cps): 140,000 - 200,000Working time (mins): 10 - 15 Fixture time (mins): 30 - 35Shear strength (MPa): 17.2 - 24.1Modulus (MPa): 344 - 483Gap fill (mm): 0.75 - 18Recommended for: pDCPD(Telene & Metton), Carbon Fibre, PA Resins, ABS, Acrylics, FRP, Gelcoats, PVC, Stainless Steel, ...
UVAHAND LED is a high-intensity hand-held UV lamp. It is easy to transport, ergonomically designed and ideal for mobile use.Its intensive irradiation ensures reliable production results within seconds. A homogeneous intensity distribution is guaranteed by the arrangements of the LEDs.The typical service life of a LED is longer than 20.000 hours. The UVAHAND LED can be switched on and off as often as necessary. It does not require a warm-up or cooling phase.It is available with emitted ...
Please visit us at the international trade fair for Rail traffic engineering InnoTrans from 23.9. – 26.9.2014 in BerlinHall 8.2. stand 230ULBRICH produces special Press and Test-Solutions for the Railway IndustryOur sales programme includes:-Spring testersShockabsorber test equipmentWheel set remover and assembly rigsWheel set bearing / housing assemble and test machinesAdjust and straightening and general assembly unitsThe machines and test systems are designed to suit the ...
The test machine is designed to measure a variety of different spring sizes from a diamter of 80mm - 500mm and lengths from 150mm to 900mm. The measurement can be carried out immediately after the manufacturing process is completed, and if required can also be integrated into setting processes.The machine guides the springs automatically and the measurement of the spring is carried out following a pre-programmed cycle. The individual springs will then be sorted according to wheter the test ...
Bluepoint LED eco has been developed for all applications requiring a most intensive UV irradiation with very limited space. Thanks to its highintensity and the possibility to program complete processsequences, e.g. exposure series with different intensities andholding times, it is possible to realize shortest cycle andmachine throughput times especially in fully automatedproduction lines. Likewise, bluepoint LED eco can be used inthe laboratory for manual ...
Tecnite FG H1 OCL 350 is a high temperature NFS H1 registered oven chain oil produced from a combination of food grade polyol ester base stocks and additives. Developed to operate in temperatures up to 260°C the additive package maximizes the lubricant’s wear protection capabilities while minimizing evaporation losses. These features result in extended chain life and lower oil consumption cost benefits. Key applications for Tecnite High Temp H1 oils include high-temp ...
Tecnite MA 52 is a 2-part, Structural Acrylate-Hybrid Adhesive. It has been developed for bonding of low surface energy materials such as Polypropylene (PP), Polyethylene (PE). In most cases it can be used without special surface pretreatmet. Benefits:Impact-resistant, flexible, excellent adhesion to difficult to bond surfaces such as PP, PE, PTFE or EPDM Good water and general chemical resistance Specially developed for bonding, encapsulating and sealing of Polyolefin ...
Hönle UVATEC modules offer effective surface disinfection through UVC irradiation – a reliable andenvironmentally compatible alternative to chemicalmethods. UVATEC UV disinfection modules have CAD-optimisedreflector geometriy to guarantee the highest irradiancepossible hence ensuring very good inactivation rates even forhighly resistant micro-organisms. The irradiation timesrequired do not exceed 0.5 seconds. Thanks to their compactand slender design as well as to ...
ULBRICH will be exibiting on the trade fair TEROTECH-MAINTENANCE in Celje, Slovenia from 20th to 23rd of May 2014.We invite you to visit us at the stand 46 in hall D.The TEROTECH-MAINTENANCE fair is the most important biennial event in Slovenia featuring product suppliers and service providers to ensure efficient maintenance and use of building complexes, machines and resources in industry. It attracts over 21,000 target-oriented visitors in only four days.